EN Standard
EN 10257-1:1998 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Land cables |
EN 10257-2:1998 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Submarine cables |
EN 186000-1:1994 |
Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables. |
EN 186001:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables. Environmental category I |
EN 186002:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category II |
EN 186003:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category III |
EN 186004:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category IV |
EN 186005:1994 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category V |
EN 186006-1:1996 |
Harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables for military use. Environmental category VI |
EN 186100:1995 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Types F-SMA |
EN 186110:1995 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type FC |
EN 186130:1996 |
Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSA |
EN 186150:1997 |
Connector sets for optical fibres and cables. Type OCCA-BU |
EN 186160:1997 |
Connector sets for optical fibres and cables. Type OCCA-PC |
EN 186170:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification:connector sets for optical fibres and cables. Type RCC |
EN 186180:1996 |
Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSB |
EN 1862:1998 |
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment |
EN 186210:1996 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type CF08 |
EN 186220:1996 |
Harmonized system of quality assessment for electronic components. Sectional specification: Connector sets for optical fibres and cables. Type LSC |
EN 186230:1996 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSF |
EN 186240:1996 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. TypeMT |
EN 186260:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. TypeSC |
EN 186270:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSH |
EN 186290:1998 |
Harmonized system of quality assessment for electronic components. Connector sets for optical fibres and cables. Type MPO |
EN 186300:1999 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables type MSC |
EN 186310:1999 |
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MF |
EN 187103:2003 |
Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications |
EN 187105:2002 |
Single mode optical cable (duct/direct buried installation) |
EN 2083:2001 |
Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard |
EN 50086-2-1:1996 |
Specification for conduit systems for cable management. Particular requirements. Rigid conduit systems |
EN 50086-2-2:1996 |
Specification for conduit systems for cable management. Particular requirements. Pliable conduit systems |
EN 50086-2-3:1996 |
Specification for conduit systems for cable management. Particular requirements. Flexible conduit systems |
EN 50086-2-4:1994 |
Specification for conduit systems for cable management. Particular requirements. Conduit systems buried underground |
EN 50117-1:2002 |
Coaxial cables. Generic specification |
EN 50117-2-1:2002 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 1000 MHz |
EN 50117-2-2:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks |
EN 50117-2-3:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks |
EN 50117-2-4:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks |
EN 50117-2-5:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks |
EN 50117-3:1996 |
Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables |
EN 50117-3-1:2002 |
Coaxial cables. Sectional specifications for cables used in telecom applications. Miniaturized cables used in digital communication systems |
EN 50117-4:1996 |
Coaxial cables used in cabled distribution networks. Sectional specification for distribution and trunk cables |
EN 50117-5:1997 |
Coaxial cables used in cabled distribution networks. Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
EN 50117-6:1997 |
Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 |
EN 50143:1999 |
Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
EN 50146:2000 |
Cable ties for electrical installations |
EN 50214:1998 |
Flexible cables for lifts |
EN 50262:1999 |
Cable glands for electrical installations |
EN 50264-1:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Standard wall. General requirements |
EN 50264-2:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Standard wall. Single core cables |
EN 50264-3:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Standard wall. Multicore cables |
EN 50266-1:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus |
EN 50266-2-1:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category A F/R |
EN 50266-2-2:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category A |
EN 50266-2-3:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category B |
EN 50266-2-4:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category C |
EN 50266-2-5:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Small cables. Category D |
EN 50267-1:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Apparatus |
EN 50267-2-1:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of the amount of halogen acid gas |
EN 50267-2-2:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. |
EN 50267-2-3:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. |
EN 50268-1:2000 |
Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Apparatus |
EN 50268-2:2000 |
Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Procedure |
EN 50288-2-1:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Horizontal and building backbone cables |
EN 50288-2-2:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHz. |
EN 50288-3-1:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterized up to 100 MHz. |
EN 50288-3-2:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables. Work area and patch cord cables |
EN 50288-4-1:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHz. s |
EN 50288-4-2:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables ch aracterized up to 600 MHz. |
EN 50288-5-1:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 250 MHz. |
EN 50288-5-2:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 250 MHz |
EN 50288-6-1:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 250 MHz |
EN 50288-6-2:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 250 MHz |
EN 50289-1-1:2001 |
Communication cables. Specifications for test methods. Electrical test methods. General requirements |
EN 50289-1-10:2002 |
Communication cables. Specifications for test methods. Electrical test methods. Crosstalk |
EN 50289-1-11:2002 |
Communication cables. Specifications for test methods. Electrical test methods. Characteristic impedance, input impedance, return loss |
EN 50289-1-13:2004 |
Communication cables. Specifications for test methods. Electrical test methods |
EN 50289-1-14:2004 |
Communication cables. Specifications for test methods. Electrical test methods |
EN 50289-1-15:2004 |
Communication cables. Specifications for test methods. Electromagnetic performance |
EN 50289-1-2:2001 |
Communication cables. Specifications for test methods. Electrical test methods. DC resistance |
EN 50289-1-3:2001 |
Communication cables. Specifications for test methods. Electrical test methods. Dielectric strength |
EN 50289-1-4:2001 |
Communication cables. Specifications for test methods. Electrical test methods. Insulation resistance |
EN 50289-1-5:2001 |
Communication cables. Specifications for test methods. Electrical test methods. Capacitance |
EN 50289-1-6:2002 |
Communication cables. Specifications for test methods. Electrical test methods. Electromagnetic performance |
EN 50289-1-7:2001 |
Communication cables. Specifications for test methods. Electrical test methods. Velocity of propagation |
EN 50289-1-8:2001 |
Communication cables. Specifications for test methods. Electrical test methods. Attentuation |
EN 50289-1-9:2002 |
Communication cables. Specifications for test methods. Electrical test methods. Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) |
EN 50289-3-1:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. General requirements |
EN 50289-3-10:2004 |
Communication cables. Specifications for tests methods. Mechanical test methods. Torsion and twisting |
EN 50289-3-11:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Cable cut-through resistance |
EN 50289-3-12:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Shot gun damage |
EN 50289-3-13:2003 |
Communication cables. Specifications for test methods. Mechanical test methods. Aeolian vibration |
EN 50289-3-15:2003 |
Communication cables. Specifications for test methods. Mechanical test methods. Underwater cable resistance to hydrostatic pressure |
EN 50289-3-16:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Cable tensile performance |
EN 50289-3-17:2002 |
Communication cables. Specifications for test methods. Mechanical test methods. Adhesion of dielectric and sheath |
EN 50289-3-2:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Tensile strength and elongation for conductor |
EN 50289-3-4:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Tensile strength, elongation and shrinkage of insulation and sheath |
EN 50289-3-5:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Crush resistance of the cable |
EN 50289-3-6:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Impact resistance of the cable |
EN 50289-3-7:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Abrasion resistance of the cable sheath |
EN 50289-3-8:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Abrasion resistance of cable sheath markings |
EN 50289-3-9:2001 |
Communication cables. Specifications for test methods. Mechanical test methods. Bending tests |
EN 50289-4-1:2001 |
Communication cables. Specifications for test methods. Environmental test methods. General requirements |
EN 50289-4-11:2002 |
Communication cables. Specifications for test methods. Environmental test methods. A horizontal integrated fire test method |
EN 50289-4-12:2004 |
Communication cables. Specifications for test methods. Environmental test methods |
EN 50289-4-14:2003 |
Communication cables. Specifications for test methods. Environmental test methods. Lightning |
EN 50289-4-2:2001 |
Communication cables. Specifications for test methods. Environmental test methods. Water penetration |
EN 50289-4-6:2001 |
Communication cables. Specifications for test methods. Environmental test methods. Temperature cycling |
EN 50289-4-9:2001 |
Communication cables. Specifications for test methods. Environmental test methods. Pneumatic resistance |
EN 50290-1-1:2001 |
Communication cables. General |
EN 50290-1-2:2004 |
Communication cables. Definitions |
EN 50290-2-1:2005 |
Communication cables. Common design rules and construction |
EN 50290-2-20:2001 |
Communication cables. Common design rules and construction. General |
EN 50290-2-21:2002 |
Communication cables. Common design rules and construction. PVC insulation compounds |
EN 50290-2-22:2002 |
Communication cables. Common design rules and construction. PVC sheathing compounds |
EN 50290-2-23:2002 |
Communication cables. Common design rules and construction. PE insulation |
EN 50290-2-24:2002 |
Communication cables. Common design rules and construction. PE sheathing |
EN 50290-2-25:2002 |
Communication cables. Common design rules and construction. Polypropylene insulation compounds |
EN 50290-2-26:2002 |
Communication cables. Common design rules and construction. Halogen free flame retardant insulation compounds |
EN 50290-2-27:2002 |
Communication cables. Common design rules and construction. Halogen free flame retardant thermoplastic sheathing compounds |
EN 50290-2-28:2002 |
Communication cables. Common design rules and construction. Filling compounds for filled cables |
EN 50290-2-29:2002 |
Communication cables. Common design rules and construction. Cross-linked PE insulation compounds |
EN 50290-2-30:2002 |
Communication cables. Common design rules and construction. Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
EN 50290-4-1:2002 |
Communication cables. General considerations for the use of cables. Environmental conditions and safety aspects |
EN 50299:2002 |
Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment $iU$dm from 72,5 kV to 550 kV |
EN 50300:2004 |
Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards |
EN 50305:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Test methods |
EN 50306-1:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Thin wall. General requirements |
EN 50306-2:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core cables |
EN 50306-3:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
EN 50306-4:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Multicore and multipair cables standard wall sheathed |
EN 50307:2002 |
Lead and lead alloys. Lead and lead alloy sheaths and sleeves of electric cables |
EN 50334:2001 |
Marking by inscription for the identification of cores of electric cables |
EN 50355:2003 |
Railway applications. Railway rolling stock cables having special fire performance. Thin wall and standard wall. Guide to use |
EN 50356:2002 |
Method for spark testing of cables |
EN 50362:2003 |
Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
EN 50406-1:2004 |
End user multi-pair cables used in high bit rate telecommunication networks. Aerial cables |
EN 50406-2:2004 |
End user multi-pair cables used in high bit rate telecommunication networks. Duct and buried cables |
EN 50407-1:2004 |
Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor cables |
EN 60228:2005 |
Conductors of insulated cables |
EN 60230:2002 |
Impulse tests on cables and their accessories |
EN 60332-1-1:2004 |
Tests on electrical and optical cables under fire conditions. Test for a vertical flame propagation for a single insulated wire or cable. Apparatus |
EN 60332-1-2:2004 |
Tests on electric and optical fibre cables under fire conditions. Test for vertfical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame |
EN 60332-1-3:2004 |
Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single vertical insulated wire or cable. |
EN 60332-2-1:2004 |
Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus |
EN 60332-2-2:2004 |
Tests on electric and optical fibre cables under fire conditions. Tests for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame |
EN 60371-3-8:1996 |
Specification for insulating materials based on mica. Specifications for individual materials. Mica paper tapes for flame-resistant security cables |
EN 60465:1992 |
Specification for unused insulating mineral oils for cables with oil ducts |
EN 60702-1:2002 |
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables |
EN 60702-2:2002 |
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations |
EN 60728-6:2003 |
Cable networks for television signals, sound signals and interactive services. Optical equipment |
EN 60728-7-1:2005 |
Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoring |
EN 60728-7-2:2005 |
Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoring. Media access control (MAC) layer specification |
EN 60728-7-3:2005 |
Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoring. Power supply to transponder interface bus (PSTIB). |
EN 60793-1-1:2003 |
Optical fibres. Measurement methods and test procedures. General and guidance |
EN 60793-1-20:2002 |
Optical fibres. Measurement methods and test procedures. Fibre geometry |
EN 60793-1-21:2002 |
Optical fibres. Measurement methods and test procedures. Coating geometry |
EN 60793-1-22:2002 |
Optical fibres. Measurement methods and test procedures. Length measurement |
EN 60793-1-30:2002 |
Optical fibres. Measurement methods and test procedures. Fibre proof test |
EN 60793-1-31:2002 |
Optical fibres. Measurement methods and test procedures. Tensile strength |
EN 60793-1-32:2003 |
Optical fibres. Measurement methods and test procedures |
EN 60793-1-33:2002 |
Optical fibres. Measurement methods and test procedures. Stress corrosion susceptibility |
EN 60793-1-34:2002 |
Optical fibres. Measurement methods and test procedures. Fibre curl |
EN 60793-1-40:2003 |
Optical fibres. Measurement methods and test procedures |
EN 60793-1-41:2003 |
Optical fibres. Measurement methods and test procedures. Bandwidth |
EN 60793-1-42:2002 |
Optical fibres. Measurement methods and test procedures. Chromatic dispersion |
EN 60793-1-43:2002 |
Optical fibres. Measurement methods and test procedures. Numerical aperture |
EN 60793-1-44:2002 |
Optical fibres. Measurement methods and test procedures. Cut-off wavelength |
EN 60793-1-45:2003 |
Optical fibres. Measurement methods and test procedures |
EN 60793-1-46:2002 |
Optical fibres. Measurement methods and test procedures. Monitoring of changes in optical transmittance |
EN 60793-1-47:2002 |
Optical fibres. Measurement methods and test procedures. Macrobending loss |
EN 60793-1-48:2003 |
Optical fibres. Measurement methods and test procedures. Polarisation mode dispersion |
EN 60793-1-49:2003 |
Optical fibres. Measurement methods and test procedures. Differential mode delay |
EN 60793-1-50:2002 |
Optical fibres. Measurement methods and test procedures. Damp heat (steady state) |
EN 60793-1-51:2002 |
Optical fibres. Measurement methods and test procedures. Dry heat |
EN 60793-1-52:2002 |
Optical fibres. Measurement methods and test procedures. Change of temperature |
EN 60793-1-53:2002 |
Optical fibres. Measurement methods and test procedures. Water immersion |
EN 60793-1-54:2003 |
Optical fibres. Measurement methods and test procedures. Gamma irradiation |
EN 60793-2:2004 |
Optical fibres. Product specifications. General |
EN 60793-2-10:2004 |
Optical fibres. Product specification. Sectional specification for category A1 multimode fibres |
EN 60793-2-20:2002 |
Optical fibres. Product specifications. Sectional specification for category A2 multimode fibres |
EN 60793-2-30:2002 |
Optical fibres. Product specifications. Sectional specification for category A3 multimode fibres |
EN 60793-2-40:2002 |
Optical fibres. Product specifications. Sectional specification for category A4 multimode fibres |
EN 60793-2-50:2004 |
Optical fibres. Products specification. Sectional specification for class B single-mode fibres |
EN 60794-1-1:2002 |
Optical fibre cables. Generic specification. General |
EN 60794-1-2:2003 |
Optical fibre cables. Generic specification. Basic optical cable test procedures |
EN 60794-2:2003 |
Optical fibre cables. Indoor cables. Sectional specification |
EN 60794-2-10:2003 |
Optical fibre cables. Indoor cables. Indoor cables. Family specification for simplex and duplex cables |
EN 60794-2-20:2003 |
Optical fibre cables. Indoor cables. Family specification for multi-fibre optical distribution cables |
EN 60794-2-30:2003 |
Optical fibre cables. Indoor cables. Family specification for optical fibre ribbon cables |
EN 60794-3:2002 |
Optical fibre cables. Sectional specification. Outdoor cables |
EN 60794-3-10:2002 |
Optical fibre cables. Outdoor cables. Family specification for duct and directly buried optical telecommunication cables |
EN 60794-3-20:2002 |
Optical fibre cables. Outdoor cables. Family specification for optical self-supporting aerial telecommunication cables |
EN 60794-3-30:2003 |
Optical fibre cables. Outdoor cables. Family specification for optical telecommunication cables for lake and river crossings |
EN 60794-4:2003 |
Optical fibre cables. Sectional specification. Aerial optical cables along electrical power lines |
EN 60811-1-1:1995 |
Insulating and sheathing materials of electric cables. Common test methods. General application. Measurement of thickness and overall dimensions. |
EN 60811-1-2:1995 |
Insulating and sheathing materials of electric cables. Common test methods. General application. Thermal ageing methods |
EN 60811-1-3:1995 |
Insulating and sheathing materials of electric cables. Common test methods. General application. Methods for determining the density. Water absorption tests. Shrinkage test |
EN 60811-1-4:1995 |
Insulating and sheathing materials of electric cables. Common test methods. General application. Tests at low temperature |
EN 60811-2-1:1998 |
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds. Methods specific to elastomeric compounds. |
EN 60811-3-1:1995 |
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds. Pressure test at high temperature. Tests for resistance to cracking |
EN 60811-3-2:1995 |
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds |
EN 60811-4-1:2004 |
Insulating and sheathing materials of electric and optical cables. Common test methods. Methods specific to polypropylene and polypropylene compounds. |
EN 60811-4-2:2004 |
Insulating and sheathing materials of electric and optical cables. Common test methods. Methods specific to polyethylene and polypropylene compounds |
EN 60811-5-1:2000 |
Insulating and sheathing materials of electric and optical fibre cables. Common test methods. Methods specific to filling compounds. Drop point. Separation of oil. |
EN 60874-1:1999 |
Connectors for optical fibres and cables. Generic specification |
EN 60874-17:1997 |
Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type F-05 (friction lock) |
EN 60874-19:1997 |
Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type SC-D (Duplex) |
EN 60875-1:2001 |
Fibre optic branching devices. Generic specification |
EN 60875-1-1:1998 |
Fibre optic branching devices. Blank detail specification |
EN 60876-1:2001 |
Fibre optic spatial switches. Generic specification |
EN 60885-2:2003 |
Electrical test methods for electric cables. Partial discharge tests |
EN 60885-3:2003 |
Electrical test methods for electric cables. Test methods for partial discharge measurements on lengths of extruded power cables |
EN 60889:1997 |
Hard drawn aluminium wire for overhead line conductors |
EN 60966-1:1999 |
Radio frequency and coaxial cable assemblies. Generic specification. General requirements and test methods |
EN 60966-2-1:2003 |
Radio frequency and coaxial cable assemblies. Sectional specification for flexible coaxial cable assemblies |
EN 60966-2-2:2003 |
Radio frequency and coaxial cable assemblies. Blank detail specification for flexible coaxial cable assemblies |
EN 60966-2-3:2003 |
Radio frequency and coaxial cable assemblies. Detail specification for flexible coaxial cable assemblies |
EN 60966-2-4:2003 |
Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors |
EN 60966-2-5:2003 |
Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 61169-2 connectors |
EN 60966-2-6:2003 |
Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 61169-24 connectors |
EN 60966-3:2003 |
Radio frequency and coaxial cable assemblies. Sectional specification for semi-flexible coaxial cable assemblies |
EN 60966-3-1:2003 |
Radio frequency and coaxial cable assemblies. Blank detail specification for semi-flexible coaxial cable assemblies |
EN 60966-3-2:2003 |
Radio frequency and coaxial cable assemblies. Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) |
EN 60966-4:2003 |
Radio frequency and coaxial cable assemblies. Sectional specification for semi-rigid coaxial cable assemblies |
EN 60966-4-1:2003 |
Radio frequency and coaxial cable assemblies. Blank detail specification for semi-rigid coaxial cable assemblies |
EN 61073-1:2000 |
Mechanical splices and fusion splice protectors for optical fibres and cables. Generic specification |
EN 61196-2:2003 |
Radio-frequency cables. Specifications. Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
EN 61196-3:1999 |
Radio-frequency cables. Specifications. Sectional specification for coaxial cables for local area networks |
EN 61196-3-2:1998 |
Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring. |
EN 61196-3-3:1998 |
Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring. |
EN 61196-4:2004 |
Coaxial communication cables. Sectional specification for radiating cables |
EN 61515:1996 |
Mineral insulated thermocouple cables and thermocouples |
EN 62012-1:2002 |
Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments. Generic specification |
EN 62037:2000 |
RF connectors, connector cable assemblies and cables. Intermodulation level measurement |
EN 62153-1-1:2004 |
Metallic communication cables test methods. Electrical. Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT) |
EN 62153-4-2:2004 |
Metallic communication cable test methods. Electromagnetic compatibility. Screening and coupling attenuation. Injection clamp method |
